Command 1: Baud rate command
Baud rate command format:
Command 2: Memory View Command
XXXXXX=memory offset, YY=word length
XXXXXX= memory offset, the length default 128 byte
Command 3: Help View Command
XX=module code, YY=size
Console Command for Serial Flash ROM
x=0: Get S-FROM ID code(2bytes).
1: Erase S-FROM data
2: Write Erase S-FROM data, Specify src_adr and wrt_size
3: Read S-FROM data to buffer, specify buf_adr and rd-size.
4: Read status register.
5: Write status register, specify register;s value.
6: Issue write enable command.
7: Display S-FROM data, specify src_adr and rep_cnt
Fujitsu firmware repair hardware: HD Doctor for Fujitsu
Data recovery Salon welcomes your comments and share with us your ideas, suggestions and experience. Data recovery salon is dedicated in sharing the most useful data recovery information with our users and only if you are good at data recovery or related knowledge, please kindly drop us an email and we will publish your article here. We need to make data recovery Salon to be the most professional and free data recovery E-book online.