June 2009

Discussion: What tools or components are needed when you desolder a flash chip

When you are handling some flash data recovery cases, we often need to extraxt the chip from the flash drives…

Flash Drives Repair and Upgrade: Extract the flash chip from a donor and solder the second chip

If you’re going to replace  the chip of your flash drives for repairing purpose or for upgrading your flash drives…

Flash data recovery: Flash drives’ typical failures

When we are coming to the topic of flash data recovery, it’s very necessary for us to have a general…

Samsung Hard Drives’ Typical Failure

When we’re dealing with Samsung hard disk recovery cases, burnt PCB is one of the most common problems we met!…

Clean room: Intel clean room, it’s cool example

In data recovery field, clean room is an important element if you want to provide comprehensive data recovery services such…

Hitachi Data recovery: Hitachi families and models

Travelstar 4GN: DKLA-24320, DKLA-23240, DKL1-22160; 2.1GB/3.2GB/4.3GB 8GS: DYLA-28100, DYLA-27900, DYLA-26480; 6.4GB/7.9GB/8.1GB 6GT: DADA-26480, DADA-25400, 5.4GB/6.48GB 4GT: DTCA-24090, DTCA-23240, 3.2GB/4.9GB 6GN:…

Data recovery: maxtor hard drives’ typical failures

Maxtor firmware failure/corruption Firmware corruption is the most famous problem maxtor drives have! Main part of firmware is stored on…

Data recovery Engineer job provided by Technetics Data Recovery in Australia

Technetics Data Recovery is a leading data recovery and data solution provider located in Melbourne Australia. At this time, we…

Data recovery: What if one of your boot up files missing

As we all know, in contrast to physical data recovery, logical data recovery is much easier! The following will discuss…

Data recovery: Hitachi hard drives’ typical failures

DeskStar HDDs = DeathStars? IBM DeskStar hard drives, mostly DTLA and AVER families, are widely known as DeathStars with its…