Recommended To Read:

What data recovery tools to buy if you want to start a data recovery business?

Free video data recovery training on how to recover lost data from different hard drives?

Where to buy head and platter replacement tools at good prices?

Data recover case studies step by step guide

I want to attend professional data recovery training courses

Sometimes a hard disk drive becomes sluggish or stops working because it needs to be cleaned. However, cleaning a hard drive disk platter is a delicate operation. Be sure to prepare yourself with the proper cleaning tools and procedure in order to give yourself the best possible chance to improve your hard drive’s performance instead of damaging it.

Here, I would like to share with you some instructions and tips on how to clean the hard drive platters properly and safely.

The following instructions are very important when we are attempting to perform the clean work on drive’s platters.

Step 1

Take your hard drive into a room that is as clean as possible to avoid dust that could damage the heads of the drive. Find a room with very little air movement if possible.

Step 2

Put on your powder-free latex gloves, anti-static wrist strap, antistatic/cleanness clothing and mask. Then you are now ready to work on your drive without causing damage from powder, moisture or static electricity.

Step 3

Use your Phillips-head screwdriver to unscrew any screws necessary to remove the drive from the CPU and the platter from the drive.

Step 4

Open the drive and use a rubber air blow-away tool or blower to blow always the dust and particles in the platter. Or you can use the air can to remove the dust. Spray the air can to remove any dust and other foreign materials on the platter. Be sure to read the instructions flow on the air can in order to know how far to hold the can from the target when spraying. Pay attention; do not make any physical contact with the platters. Any fingerprint or physical scratch to the platters will be fatal to your data.

Step 5

Reassemble your hard drive and properly store or dispose of your cleaning and assembly materials.

Step 6

Try using your newly cleaned hard drive after you reinstall it. If it still is not performing to your satisfaction, try contacting a professional computer hardware maintenance service.

Tips & Warnings

Try putting your hard drive on a table or desk so you can be seated while working on it. This could help you clean the drive with more accuracy and stability. Work in a well-lit area so you can get the best possible view of your hard drive and the dust or dirt on it.
If you don’t wear an anti-static wrist strap, then at least touch a metal object before working on your hard disk drive. Otherwise, you could damage sensitive parts of the drive with static electricity. Also, don’t use a cloth or chemicals to clean the hard drive platter because you could damage it.

Data recovery Salon welcomes your comments and shares with us your ideas, suggestions and experience. Data recovery salon is dedicated in sharing the most useful data recovery information with our users and only if you are good at data recovery or related knowledge, please kindly drop us an email and we will publish your article here. We need to make data recovery Salon to be the most professional and free data recovery E-book online.